The selection and use of bathtubs: AIM Faucet

Here are some key information for reference regarding the selection and use of bathtubs:

1、 Common types of bathtubs

Material classification:

Acrylic: lightweight insulation, diverse shapes, moderate price (290-1200usd)

Cast iron: durable and heavy (weighing about 80-150kg), good insulation, and relatively high price (750-2200usd)

Artificial stone: high-end texture, strong customization (1200-4300usd)

Wood (such as cypress): Natural material that requires regular maintenance (450-1500usd)

Functional classification:

Ordinary bathtub: standard size length 1.5-1.8m

Massage bathtub: equipped with hydraulic/bubble massage system (price starting from 2200usd)

Sitting style bathtub: deep cylinder design (water depth up to 50cm)

2、 Installation precautions

Space requirements:

Independent bathtub requires a reserved activity space of ≥ 100cm

Embedded bathtub needs to be built in advance (it is recommended to leave a maintenance port)

Water and electricity reservation:

The massage bathtub needs a separate circuit (power usually 1500-2500W)

It is recommended to choose a drainage pipe with a diameter of 50mm to prevent blockage

3、 Usage and maintenance

Cleaning techniques:

Acrylic material should avoid using abrasives

Use pipeline dredging agent every month to prevent blockage

Water saving suggestions:

A regular bathtub consumes approximately 150-200L of water

Suggest using it in conjunction with a constant temperature mixing valve

4、 Emerging Trends

Smart bathtub: with APP control and UV sterilization function

Thin edge design: 5cm ultra narrow edge enhances aesthetics

Composite material: such as acrylic+glass fiber reinforced structure

5、 Purchase suggestions

Small bathroom with optional 1.2m sitz bathtub

Elderly families recommend styles with anti slip patterns

Due to limited budget, a steel plate bathtub (priced between 220-600usd) can be considered

It is recommended to conduct a 24-hour closed water test before installation to check the load-bearing capacity of the floor slab (recommended ≥ 400kg/m ²). When using, pay attention to maintaining a full water state for 4-6 hours after the first water injection, and check for leaks.